Despite owning a small collection of bikes, I didn’t really have anything ideal as winter trainer/commuter. I wanted something reasonably robust, not so valuable as to worry about adding a few chips and dings, yet good looking, responsive and fun to ride. With only about one month of winter left (I hope), I’ve now built the bike based on a resprayed Freddie Grubb 23-inch frame bought for about £120 on eBay. The forks are, I think, Reynolds 531 but the frame is not, although it doesn’t feel unduly heavy.
It’s actually a Holdsworth bike; Holdsworth bought Freddie Grubb’s business in 1951, two years after his death, and used the brand until 1978. The frame was advertised as a 1960s one, although after a little research I suspect it is actually early 1970s. It had been resprayed and I made a few accidental marks in the rather soft blue paint during the build, but these will be easy to touch up. To build the bike, I mainly used up spare parts that were already in the junk box, including a 50-34 ‘compact double’ TA chainset (French manufacturer, Spécialités TA, pioneered aluminium chainrings as far back as 1947, and still makes them today), Suntour 14-30 freewheel, and Suntour V-GTX rear derailleur. I previously used this set up on my Hetchins for the L’Eroica ride in 2012. The shifters are Suntour power shifters (99p on eBay). Suntour were, I believe, the first to introduce ratchets into friction shifters. This prevents them slipping so you don’t have to keep tightening the little ring on the side after changing gear a few times.
The rear wheel of the new bike is the one I built last week – the first wheel I’ve ever built. It consists of a Campagnolo Record hub, Weinmann XR18 rim and plain spokes that came with the original wheel from which the rim was taken. The front wheel is a Quando hub with XR18 rim. I have a spare Campag Record front hub and I know the little inconsistency between the hubs will irritate me until I strip the front wheel and replace the cheap Quando hub with the Campag that matches one in the rear wheel.
The chainset/freewheel combination produces a wide gear range. With the 700C x 23 tyres and 172.5mm cranks I can select ratios from 29.8 gear inches to 93.9 gear inches.
A typical modern set up with a 52-39-30 up front and 12-25 cassette at the back would produce a range from 31.5 to 113.9 gear inches, so I actually have a lower “granny” gear and only miss out a little at the high end, which doesn’t worry me at all. (Sheldon Brown used a similar front-end set up on his Hetchins with a 50-28 chainset but 9-speed cassette on the back.)
One of the problems I encountered during the build up was that a 27.2mm seat post wouldn’t fit, but it was only slightly too large. In searching for something very slightly smaller, I came across this seller on eBay. He sells a choice of seat posts in fractional mm diameters from 25mm to 31.4mm. A 26.2mm post was a very good tight fit into the Grubb seat tube. (I have no commercial connection with they guy except I bought two seat posts from him – they appear to be good quality and were delivered fast.)
I’ve taken the bike for a very short test ride and it’s great – fits me well, the gears shift smoothly and the brakes work. Now I just need to add mudguards and a means of carrying a modest amount of luggage.
As is often the case when you build a bike from individual components, my Freddie Grubb is almost certainly not worth the money I paid for parts. But I’ve learned a lot while building it, it’s absolutely fit for purpose, I understand how every single part goes together, and it’s totally unique. All of which makes it priceless.